Open Hours: All 7 days ( 7 am to 11 pm ) +1 (705) 951-2007 support@ssappliancesolutions.com

DIY Repair Techniques For Washer

Request a Quote

DIY Repair Techniques For Washer

  • Washer Not Draining Properly
  1. Check the Drain Hose: Inspect the drain hose for kinks or obstructions that may be hampering proper drainage. Straighten the hose to allow free water flow.
  2. Clean the Drain Pump Filter: Remove lint or any other objects that may be obstructing the drain pump filter.
  3. Look into the Drain Pump: A faulty or damaged drain pump needs replacement. The washer’s user manual provides more information on checking the drain pump.
  • Washer Not Spinning
  1. Check the Drive Belt: Inspect the drive belt and check its condition. If it’s worn out, broken, or damaged, you can consider replacing it.
  2. Test the Lid Switch: The lid switch ensures that the washer stops spinning when the lid is open. You can use a multimeter to check its continuity and replace it.
  3. Reset the Washer: You can try resetting the washer’s control panel by unplugging the washer for a few minutes, plugging it back, and restarting it.
  • Washer Not Spinning
  1. Check the Drive Belt: Inspect the drive belt and check its condition. If it’s worn out, broken, or damaged, you can consider replacing it.
  2. Test the Lid Switch: The lid switch ensures that the washer stops spinning when the lid is open. You can use a multimeter to check its continuity and replace it.
  3. Reset the Washer: You can try resetting the washer’s control panel by unplugging the washer for a few minutes, plugging it back, and restarting it.
  • Washer Leaking Water
  1. Inspect the Water Inlet Hoses: Check the water inlet hoses for any cracks, leaks, or loose connections to tighten or replace them to prevent water leakage.
  2. Check the Door Seal or Tub Seal: Check and replace the door seal or tub seal that is torn, cracked, or has a gap.
  3. Unclog Detergent Dispenser: Examine the detergent dispenser and clean it to ensure proper water flow and drainage.
  • Washer Making Unusual Noise
  1. Check the Load: An uneven load can make the washer noisy. Check the load and rearrange the clothes to spread the weight evenly and restart the cycle.
  2. Inspect the Drum Bearings: Worn or faulty drum bearings can cause the washer to make noise. If the bearings are damaged, you must replace them.
  3. Detect Loose Parts: If any components are loose, tighten them so they do not cause a rattling noise.
  • Washer Making Unusual Noise
  1. Check the Load: An uneven load can make the washer noisy. Check the load and rearrange the clothes to spread the weight evenly and restart the cycle.
  2. Inspect the Drum Bearings: Worn or faulty drum bearings can cause the washer to make noise. If the bearings are damaged, you must replace them.
  3. Detect Loose Parts: If any components are loose, tighten them so they do not cause a rattling noise.

We are a full-service appliance repair & installation service provider in GTA who works with complete transparency because we prioritize customer delight. Our affordable, quick, and reliable services aim to make your experience hassle-free.

All Rights Reserved.